How practise I install my Doona in the automobile?

You may find detailed instructions on How To install the Doona here:

  • In the user guide located at its designated slot at the back of the Doona or onour website. Europe: page 35. United states of america: page 45.
  • For more information spotter theHow To Use videos.

Can I install the Doona car seat in a frontwards facing position?

No. The Doona car seat intended for rearward facing merely.

When using Doona in the car, how should the Doona handle exist positioned?

When installing the Doona in the car, with or without a base, tilt the handle toward the vehicle seat in an anti-rebound position.

Can I install the Doona Car Seat in the front seat of my car?

Y'all may install the Doona motorcar seat in the car as long as y'all:

  • NEVER use the Doona Automobile Seat on a passenger seat with an active frontal airbag!
  • NEVER install the Doona Car Seat on a rear-facing vehicle seat or on a side-facing vehicle seat.

How practice I install the Doona in the machine without the base?

For correct installation of Doona in the car please refer to the User Guide:

User Guides

Europe: page 35.
US: folio 45.

How do I know if the shoulder straps are not also tight for my baby?

A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not printing on the child'southward flesh or push button the kid'due south body into an unnatural position.

How to suit the shoulder straps pinnacle?

  • Disconnect the shoulder straps from the metal harness plate located at the back of the car seat.

  • Pull out the shoulder straps from the front and remove the shoulder strap pads from them.

  • Thread the shoulder straps through the appropriate shoulder strap slots. IMPORTANT! Shoulder straps must be routed at the same height or slightly below the child's shoulders.

  • Reconnect the shoulder straps to the metal harness plate at the dorsum of the car seat. IMPORTANT! Make sure straps are not twisted.

  • IMPORTANT! The shoulder straps, fastened to the metal plate, MUST be routed BETWEEN the metallic bar and the seat body.

What is the correct height of the shoulder straps for my babe?

Ensure the shoulder straps are inserted through the shoulder strap slots at or just below the child's shoulders.

My infant is but a few months sometime and the harness straps experience too tight, what should I do?

  • Make certain that the harness straps, at the back of the Doona, are threaded betwixt the Doona body and the metal bar.
  • Check if the baby has outgrown the Infant Insert and remove it.
  • Brand certain the shoulder straps are non twisted.
  • Verify that the shoulder straps are threaded in the correct superlative for the baby'due south shoulders.

The handle does not extend what should I practise?

The Doona handle is designed to prevent misuse, therefore it can be extended but when the handle is in rear facing stroller position.

To rotate the handle into a stroller way, printing both white buttons simultaneously (located on both sides of the handles) and then rotate the handle to rear facing stroller position.

To extend the handle press the white button at the top of the handle then pull the handle to towards y'all.

The handle does not rotate what should I practise?

To rotate the handle, printing both white buttons simultaneously (located on both sides of the handles) and then rotate the handle to the desired position.