How To Repair A Fence Post Without Removing It

Download Commodity

Download Commodity

The removal of wooden fence posts normally involves a procedure that includes loosening the mail from the surrounding ground or physical, then carefully extracting the post in a manner that does not cause the mail service to snap or splinter. Past taking your fourth dimension and making certain everything is in place before commencement to extract the debate mail service, the job can be completed with a minimum of difficulty. Nosotros'll show you how.

Things You Should Know

• Dig a trench around the postal service and soak the surrounding soil with water.
• Bulldoze nails into the post. Then, wrap rope effectually the nails, loop the rope effectually the post, and tie it off.
• Put a concrete block on each side of the post with a board across them. Attach the rope to ane end of the board and stand on the other end to uproot the post.
• Alternatively, wrap a chain several times around the mail. Secure the chain to a jack and use the jack to tug the post up and out of the footing.

1. 1

   Assess the condition of the fence postal service. A wooden postal service that is sunk into the surrounding soil volition be relatively like shooting fish in a barrel to remove, while one that is sunk into concrete will require additional equipment. Any wooden contend post that is severely deteriorated may also require boosted tools to manage the extraction.

2. 2

   Dig a trench around the post using a shovel. The trench does non have to be whatever deeper than about 1 human foot (0.3 yard). Remove the clay directly around the post, or effectually the concrete plug that is holding the post in position.

   • Wear eye protection when digging effectually physical, to protect against chipped concrete fragments.

   Advertisement

3. 3

   Soak the remaining soil. Watering the soil around the postal service will loosen it and make information technology easier to remove the post.

4. 4

   Rock the mail service in place. Push it backward and forward several times to aid loosen the post and plug every bit the pigsty is enlarged slightly. Try not to break the post.

5. 5

   Blast it. Bulldoze four nails into each face of the postal service. Position the nails so they are driven into the surface of the postal service at roughly ane pes (0.iii m) from the basis level. Make sure the nails are driven at least halfway into the wood, creating a firm hold.

6. half-dozen

   Tie it up. Secure a length of potent rope to the series of nails on the post. This can be accomplished by wrapping the rope around and under each exposed nail caput in succession, finally tying the rope tightly around the body of the argue post.

7. 7

   Create a lever to assistance extract the post. This can be achieved by placing one to two layers of concrete blocks on one side of the trench, and then laying a thick plank or board across the blocks.

8. 8

   Attach the rope to the finish of the board closest to the post. Drive a couple of nails into the board to create a means of securing the rope into position.

9. ix

   Stand on the opposite end of the board. The consequence will be somewhat like a seesaw, in that every bit your cease moves toward the ground, the tension on the rope increases and pulls the postal service upward, slowly extracting the buried portion of the postal service.

10. ten

    Remove the post from the hole. One time the post is pulled up, detach the rope and motion the post away from the open up hole.

Ad

1. 1

   Dig out soil around the post. If the fence post has a large physical base or is very firmly anchored in soil, y'all may need to use a farm jack (How-do-you-do-Lift jack) and chain to pull it out. To ready for this, dig out the soil around the mail to a depth of ane to 1½ anxiety (0.3 to 0.46 meters). A posthole digger will make this easier.

2. two

   Pause up the soil or physical farther. Apply a pointed digging bar or stone bar to further loosen the soil, or to pause up the concrete if possible. Article of clothing eye protection to protect against flying physical fragments.

3. iii

   Lay a thick block across the pigsty. Use a block at to the lowest degree four inches (10 cm) thick, with a apartment top that tin support your jack. Place it across the hole next to the base of operations of the mail service. Position the cake securely and then it will not shift during construction. Make sure it is located far plenty from the post that the physical base of operations volition non strike the cake on its fashion up.

4. iv

   Wrap a concatenation around the mail service. Wrap a 3 to 5 human foot (0.nine to 1.5 m) length of chain several times around the post, as depression to the ground every bit possible.

5. 5

   Secure the chain to the jack. Place the jack on top of the cake. Loop the chain tightly around the jack's runner and secure it in place.

6. vi

   Operate the jack. Put on a pair of heavy leather gloves and stand up to the side of the jack's handle. Operate the jack to lift the chain and gradually tug the fence mail upward and out of the ground.

Ad

Add together New Question

• Question

  How do I remove cemented fence posts?

  

  Anthony "TC" Williams is a Professional Landscaper in Idaho. He is the President and Founder of Aqua Conservation Landscape & Irrigation, an Idaho Registered Landscape Business Entity. With over 21 years of landscaping experience, TC has worked on projects such as the Idaho Botanical Garden in Boise, Idaho. He is a Idaho Registered Contractor and a previously Licensed Irrigator in the State of Texas.

  

  Experienced Landscaper

  Expert Answer

  

  Support wikiHow by unlocking this good answer.

  By digging out post as deep as possible all the way around first. Use a heavy 'excavation bar' or 'rock bar' to pause up concrete as best you tin, and then remove as much from hole every bit you tin. Lift out the post by using the lever method or the jack method above.

• Question

  How practise I pull the residuum of a post that has sunk into the footing?

  

  Ofttimes these are completely rotten. If at that place is room, dig a trench aslope the pigsty, and then just dig all the pieces out. If there is no room, you will have to effort and break it up with a bar and pull pieces out. If it is not rotten, you can drill into the summit and then spiral in a large lag screw fastened to a chain and and then elevator up using a farm jack.

• Question

  How do I remove large argue posts that are from railroad ties?

  

  Depending on the size, you may need to rent pneumatic equipment, similar a front terminate loader.

Enquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

Video

• Fence posts sunk with concrete may require the use of heavier equipment, such as a post puller. Motorized versions of this device work by driving thin tines into the wooden surface of the post and using the power of the motor to extract the post and the concrete plug.

• By attaching a 3/iv inch pipe to a hose, you can run the water and poke the pipe in the dirt effectually the cement to loosen information technology up. When the post can be wiggled with your hands, so it can be raised. Modest concrete can exist cracked with a sledge hammer.

• Removing debate posts is easier with ii people. The weight of a single person may not budge the post, making the homemade lever less efficient, whereas the weight of 2 people will likely be sufficient to excerpt the post from the ground.

• An alternative method would involve sliding a metal ring over the postal service and driving the nails in above the ring. Attach a strong chain to the ring, again using the blocks and plank to create a makeshift lever.

• Posts that are well sunk in physical can be removed by cutting the post close to the ground then hitting the stump with a sledge hammer to lower information technology beneath the surface of the ground.

• Reuse the erstwhile concrete vanquish if it is solid and in good shape. A round corner foursquare treated post can fit in a concrete shell left from a rotted out cedar post with possibly some small-scale trimming with a saws-all.

Advertisement

Things Yous'll Need

• Shovel
• Rope
• Hammer
• Nails
• Thick Plank
• Concrete Blocks
• Heavy-duty leather gloves
• Eye protection

• Farm jack (Hi-Elevator jack)
• Chain
• Pointed digging bar or rock bar

About This Article

Commodity Summary X

To remove a fence postal service, start by digging a trench around the mail that'southward about 1-human foot deep. Then, fill the trench with water to loosen the soil and then information technology'southward easier to get the post out. Next, rock the post back and forth to start to loosen it in the pigsty. In one case you've rocked it back and forth a few times, bulldoze a nail into each confront of the post about 1 foot up from basis level. After that, loop some rope effectually the nails and tie it to the fence post. When yous're washed tying it, brand a lever by stacking some concrete blocks adjacent to the post and laying a wooden plank over them. And so, tie the rope to the plank. Finally, step on the contrary side the plank to pull the postal service up and out of the footing. For more tips from our Landscaping co-author, like how to remove a fence post using a jack and chain, scroll downwards!

Did this summary help you lot?

Thanks to all authors for creating a page that has been read 166,685 times.

Did this article assistance you?

Source: https://www.wikihow.com/Remove-Fence-Posts

Share this post